or
Home > AR15 Upper Components > Rails & Risers
Sort By:
Page of 2
Magpul M-LOKâ„¢ Polymer Rail, 3 Slots M-LOK Slot System MAG589
Magpul M-LOK™ Polymer Rail, 3 Slots M-LOK Slot System MAG589
Price: $9.95
Sale Price: $4.98
Savings: $4.97

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
3 Slots, max overall length of 1.6 in.
Made in U.S.A.
E.A.R. Export Administration Regulations Controlled Product
more info
AR Riser 3 Slot Medium Profile - MT-1011M
AR Riser 3 Slot Medium Profile - MT-1011M
Price: $11.81
Sale Price: $6.99
Savings: $4.82

Product Description

  • Industrial Aircraft Aluminum
  • Matte Black Type 3 Hard Anodizing
  • 3 Slot Picatinny Riser
  • See Through Design For Iron Sight Use
  • Medium Profile Riser
  • 1.6"x1.75"x1"


Overview

This medium profile AR riser is used to give you that added height your optics need for your objective lens to clear the receiver, or for your optic to co-witness with your iron sights. It is a see through design which allows you to see your iron sights through the peep hole.
more info
AR Medium Riser - MT-RISER-M
AR Medium Riser - MT-RISER-M
Price: $12.25
Sale Price: $6.99
Savings: $5.26

AR Riser with 5 Slot Picatinny Rail, Low Profile

Approximately 13/16 Inch rise

more info
AR Riser, 3 Slot, Low Profile - MT-1011L
AR Riser, 3 Slot, Low Profile - MT-1011L
Price: $11.81
Sale Price: $9.45
Savings: $2.36

Product Description

  • Industrial Aircraft Aluminum
  • Matte Black Type 3 Hard Anodizing
  • 3 Slot Picatinny Riser
  • See Through Design For Iron Sight Use
  • Low Profile Riser
  • 1.6"x1.6"x0.7"


Overview

This low profile AR riser is used to give you that added height your optics need for your objective lens to clear the receiver, or for your optic to co-witness with your iron sights. It is a see through design which allows you to see your iron sights through the peep hole.
more info
AR Riser Mount With 5 Slots,13/16 Inch Medium Profile - MT-RMQ
AR Riser Mount With 5 Slots,13/16 Inch Medium Profile - MT-RMQ
Price: $26.50
Sale Price: $19.99
Savings: $6.51

AR Riser Mount With 5 Slots

13/16 Inch Medium Profile

more info
Magpul Industries MOE SL Hand Guard, Carbine-Length MAG538 Grey, MAG538-GRY
Magpul Industries MOE SL Hand Guard, Carbine-Length MAG538 Grey, MAG538-GRY
Price: $34.95
Sale Price: $20.97
Savings: $13.98

The MOE SL Hand Guard for AR15/M4 firearms with carbine-length gas system and A2 font sight* provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other direct-attach M-LOK accessories for the mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Large front extensions and lower lip provides additional operator protection from hot front sight assembly.
Made in U.S.A.
ITAR International Traffic in Arms Regulations Controlled Product


Features •Narrow design replaces bulky M4 Carbine-type plastic hand guards •Easy to install utilizing existing delta ring and round front hand guard retaining cap •Slots at the two, six, and ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections •Reinforced, heat-resistant polymer construction •Integral riveted aluminum heat shield •Front lip and long side extensions shields hand from hot sight assembly Specifications • MOE SL Hand Guard, Carbine-Length • Weight: 6.7 oz. • Length, maximum: 8.9 in. • Width, maximum: 1.8 in. • Height: 2.4 in. NOTE: The MOE SL Hand Guard – Carbine-Length is a direct replacement for M4 carbine type hand guards and utilizes the existing round front hand guard retaining cap and delta ring. Will also fit most 7.62x51 weapons with a carbine length gas system. *Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible. Factory sling swivel is not compatible and, if equipped, must be removed from the A2 front sight assembly
more info
Magpul Industries MOE M-LOK Handguard Mid-length MAG426-GRY
Magpul Industries MOE M-LOK Handguard Mid-length MAG426-GRY
Price: $34.95
Sale Price: $20.97
Savings: $13.98

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.



Made in U.S.A.



ITAR
International Traffic in Arms Regulations Controlled Product

Features

Replaces standard plastic AR15 mid-length hand guards
Compatible with both 'direct impingement' and most piston-driven gas systems
Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
Reinforced, heat-resistant polymer construction
Integral riveted aluminum heat shield
Front lip and side extensions, shields hand from hot gas block
Relieved area at the top rear accommodates most overhanging optic mounts



Specifications

MOE M-LOK Hand Guard, Mid-Length
Weight: 8.7 oz.
Length, overall: 9.2 in.
Length, mounting: 8.6 in.
Height, excluding lip: 2.5 in.
Width, max: 2.2 in.


NOTE: The MOE M-LOK Hand Guard – Mid-Length is a direct replacement for factory-type hand guards and utilizes the existing front hand guard retaining cap and delta ring.
more info
Magpul Industries MOE M-LOK Handguard Mid-length MAG426-odg
Magpul Industries MOE M-LOK Handguard Mid-length MAG426-odg
Price: $34.95
Sale Price: $20.97
Savings: $13.98

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.



Made in U.S.A.



ITAR
International Traffic in Arms Regulations Controlled Product

Features

Replaces standard plastic AR15 mid-length hand guards
Compatible with both 'direct impingement' and most piston-driven gas systems
Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
Reinforced, heat-resistant polymer construction
Integral riveted aluminum heat shield
Front lip and side extensions, shields hand from hot gas block
Relieved area at the top rear accommodates most overhanging optic mounts



Specifications

MOE M-LOK Hand Guard, Mid-Length
Weight: 8.7 oz.
Length, overall: 9.2 in.
Length, mounting: 8.6 in.
Height, excluding lip: 2.5 in.
Width, max: 2.2 in.


NOTE: The MOE M-LOK Hand Guard – Mid-Length is a direct replacement for factory-type hand guards and utilizes the existing front hand guard retaining cap and delta ring.
more info
Magpul MOE M-LOK Hand Guard, Rifle-Length – AR15/M16 MAG427-GRY
Magpul MOE M-LOK Hand Guard, Rifle-Length AR15/M16 MAG427-GRY
Price: $39.95
Sale Price: $23.97
Savings: $15.98

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M16 rifles with rifle-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

ITAR
International Traffic in Arms Regulations Controlled Product



Features

  • Replaces standard plastic M16-type rifle-length hand guards
  • Compatible with both 'direct impingement' and most piston-driven gas systems
  • Easy to install utilizing existing delta ring and triangular or round front hand guard retaining cap
  • M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
  • Reinforced, heat-resistant polymer construction
  • Integral riveted aluminum heat shield
  • Front lip and side extensions, shields hand from hot gas block
  • Relieved area at the top rear accommodates most overhanging optic mounts

Specifications

  • MOE M-LOK Hand Guard, Rifle-Length
    • Weight: 12.1 oz.
    • Length, overall: 12.6 in.
    • Length, mounting: 12.0 in.
    • Height, excluding lip: 2.5 in.
    • Width, max: 2.2 in.

NOTE: The MOE M-LOK Hand Guard – Rifle-Length is a direct replacement for factory-type M16 hand guards and utilizes the existing front hand guard retaining cap and delta ring.
more info
Magpul MOE M-LOK Hand Guard, Rifle-Length MAG427 - Black
Magpul MOE M-LOK Hand Guard, Rifle-Length MAG427 - Black
Price: $39.95
Sale Price: $23.97
Savings: $15.98

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M16 rifles with rifle-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

ITAR
International Traffic in Arms Regulations Controlled Product



Features

  • Replaces standard plastic M16-type rifle-length hand guards
  • Compatible with both 'direct impingement' and most piston-driven gas systems
  • Easy to install utilizing existing delta ring and triangular or round front hand guard retaining cap
  • M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
  • Reinforced, heat-resistant polymer construction
  • Integral riveted aluminum heat shield
  • Front lip and side extensions, shields hand from hot gas block
  • Relieved area at the top rear accommodates most overhanging optic mounts

Specifications

  • MOE M-LOK Hand Guard, Rifle-Length
    • Weight: 12.1 oz.
    • Length, overall: 12.6 in.
    • Length, mounting: 12.0 in.
    • Height, excluding lip: 2.5 in.
    • Width, max: 2.2 in.

NOTE: The MOE M-LOK Hand Guard – Rifle-Length is a direct replacement for factory-type M16 hand guards and utilizes the existing front hand guard retaining cap and delta ring.
more info
   
 
Social Tab
Follow Elite Tactical Components!
:like>
Pinterest YouTube Instagram Close
Testimonials

I was on your website last night and ordered two or three items. I noticed the number of pictures for the items on sale has increased significantly. They look great and really add to the presentation of all your parts/components for sale. Great job and keep up the good work. You're an outstanding staff and the best customer service. — Semper Fidelis, Rod

Thanks for the fast shipping! I ordered June 14 and had it in the noon mail on June 17. You also sent me several emails notifying me of the order and that it had shipped. I appreciate that initial contact. — Robert

Thank you very much. I will be doing business with you many times in the future. Excellent customer service. – D. Anderson